Sonax Profiline Ceramic Coating CC Plastic + Rubber

SONAX Profiline Ceramic Coating CC Plastic + Rubber is a Si-Carbon technology-based sealant that refreshes and protects unpainted exterior plastic parts, such as trims, bumpers and mirror housings. The extremely flexible coating is also suitable for the care of tyres and protects against fading due to UV radiation. It gives the surfaces strong water and dirt repellent properties and is very easy to apply. Comes in a set with 4 applicators.

Key Features and Benefits:

- Suitable for unpainted exterior plastic parts and tyres

- Restores colour of unpainted plastic parts

- Provides high water and dirt-repellent properties

- Protects surfaces from fading due to UV radiation

- Si-Carbon based

Box contents: 1x SONAX Profiline 241000 Ceramic Coating CC Plastic + Rubber (50 ml) and 4x applicator

Directions for use:

1. Clean surface with panel wipe such as Sonax Profiline Prepare.

2. Dispense a few drops of CC Plastic + Rubber onto the soft foam side of the applicator and apply thinly to the surface in small sections. Ideally, contact points with the body should be masked beforehand so that no product gets on the paintwork. If it does happen, wipe immediately with a microfiber cloth.

3. After a short exposure time of approx. 3-5 minutes, wipe off excess product with a new microfiber cloth soft touch.

4. Leave the coating to cure for at least 6 hours. During this time, the vehicle must be kept in a dry environment and the surfaces must no longer be touched. For optimal results, we recommend letting the coating sit for 12 hours to ensure a complete reaction with the surface.

Note: Always use pH-neutral shampoos such as Sonax Gloss Shampoo or Sonax Profiline Active Foam for washing. Do not use alkaline cleaners.

PLEASE NOTE: 

• During application, ensure good ventilation.