Sonax Singapore
SONAX Profiline MultiClean Acid Cleaner Concentrate 5L
SONAX Profiline MultiClean Acid Cleaner Concentrate 5L
Couldn't load pickup availability
SONAX PROFILINE MultiClean Acid is a powerful cleaner for acid-soluble dirt such as rust bloom, as well as cement or wall paint residues. Removes limescale and fresh water spots. For washing existing ceramic sealants contaminated with mineral road dirt.
Get a FREE 5L Tap for every 5L canister purchased. While stock lasts.
Directions for use:
For heavy soiling dilute with water at a ratio between 1:10 and 1:20, for light soiling and sealed paintwork at a ratio between 1:50 and 1:100 and apply with SONAX Pump Vaporiser for acids+alkalines (04960050). Leave to work for 1 to a maximum of 3 minutes. Afterwards, wash vehicle and thoroughly rinse off.
PLEASE NOTE: Protect against frost. Do not use on hot surfaces, do not allow to dry.
Frequently Asked Questions (FAQ):
Q: What dilution and dwell time should I use, and is it safe on ceramic-sealed paint?
A: For heavy soiling, 1:10 to 1:20; for light soiling on sealed paint, 1:50 to 1:100, with a 1–3 minute dwell before rinsing thoroughly. It is specifically suitable for cleaning ceramic-sealed paint contaminated with mineral road dirt, provided you stay at the higher-dilution end and do not let it dry on the surface.
Q: What is it?
A: An acid pre-cleaner that removes acid-soluble contamination — rust bloom, cement and wall-paint residue, limescale, and mineral water spots — that alkaline and neutral cleaners cannot dissolve.
Q: Why buy this?
A: It is the targeted answer to mineral contamination, particularly relevant in Singapore where hard water leaves mineral deposits that bake onto paint and glass and resist ordinary washing.
Q: How does it differ from Multiclean Alkaline?
A: Acid dissolves mineral soiling (rust bloom, cement, limescale, water spots); Alkaline dissolves organic and greasy soiling (insects, brake-dust film). Match the product to the contamination rather than reaching for one by default.
Q: What must I avoid?
A: Never apply to hot panels or allow it to dry in, and always rinse fully after the 1–3 minute dwell. Use only through an acid-rated pump vaporiser. It is frost-sensitive in storage.
Share
