SONAX Soft Top + Fabric Waterproof Coating Kit for Convertible Roof & Upholstery

SONAX Soft Top + Fabric Water Proof Impregnation is a sealant and waterproofing for convertible covers made of fabric. It seals above all the heavily stressed creases and the seams, refreshes colour and protects against re-soiling. Also protects and impregnates textiles in the interior, preventing dirt and moisture from entering seats made of fabric and Alcantara, or carpets and textiles. Transparent so suitable for all colours. Comes in a set with an application sponge for clean and even application.

Key Features and Benefits:
- Sealant and waterproofing for textiles, fabric, and upholstery, including Alcantara and carpets
- Suitable for fabric convertible roof covers
- Restores colour of fabric and protects against re-soiling
- Adds dirt and water-repellency
- Suitable for fabric of any colour

Box contents:
1x SONAX Soft Top + Fabric Water Proof Impregnation (250 ml)
1x application sponge

Directions for use:
Convertible cover
1. Wash the hood cleanly, and rinse thoroughly with clean water. Allow to dry.
2. Shake bottle well. Dispense Soft Top + Fabric Water Proof on the provided application sponge, apply to the dry top and rub evenly.
3. While wet, briefly remove or wipe over any excess with a dry microfiber cloth. Then let the hood dry. The hood must not get wet immediately after application (if necessary, store vehicle indoors).

Seats
1. Clean seats before use with an upholstery cleaner e.g. Sonax Alcantara + Fabric Cleaner and allow to dry.
2. First apply on an inconspicuous area to check for colour fastness of the seat.
3. Shake bottle well. Dispense Soft Top + Fabric Water Proof on the provided application sponge, apply to dry seats and rub evenly.
4. Leave doors open for half an hour to dry.

PLEASE NOTE:
• Product contains solvents: Avoid contact with skin.
• Be careful with repainted vehicles. When applying, make sure that no product gets on the paint or the discs.
• Do not apply to leather or plastics.

Frequently Asked Questions (FAQ):

Q: How many coats does the soft top need, and how long between coats?
A: This is a specialist product for convertible soft-top and fabric-roofed vehicle owners. A Small but dedicated segment in Singapore. Apply two coats: the first penetrates fabric fibres, the second builds the waterproof barrier. Allow 20–30 minutes between coats. Full cure is 24 hours; a third coat on particularly porous or aged fabric is worthwhile.
Q: What does over 150 degrees contact angle mean?
A: Water beads and rolls off almost completely; among the most hydrophobic textile treatment achievable.
Q: What steps are included in the kit, and in what order should they be used?
A: PFAS-free silicone-resin technology at over 150 degree contact angle; maximum hydrophobicity with modern regulatory compliance.
Q: Does it restore colour?
A: Yes, also restores colour to faded tops and seals seams to prevent water entry.
Q: Does it repel dirt?
A: Yes, after treatment, dirt is repelled from the fabric surface, simplifying future cleaning.